CGI Windows & Doors in Boulder City, NV

Sliding glass doorsSliding glass doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Windows & Doors in Boulder City, NV

We provide independent CGI window and door service across Boulder City, from the 1930s bungalows of the historic core to the ranch homes in the outlying pockets. The one thing that makes our CGI work here different: many street-facing openings sit under historic design review, so we often pair period-correct frame profiles with modern high-performance glazing instead of dropping in a standard vinyl unit. That combination is where a lot of outside contractors miss the mark in Boulder City. Call (833) 549-7716 to talk through your project and set up a free estimate.

Call (833) 549-7716

Why Boulder City Residents Choose Us for CGI Service

We’re an independent service provider. We’re not affiliated with, authorized by, or endorsed by CGI, and that independence is the point. We quote repair, retrofit or replacement on the merits of the CGI unit in front of us, not on a dealer program that pushes one outcome.

CGI is one of the brands Boulder City homeowners call about most, so we’ve seen where these units hold up and where they don’t in this climate. Our technicians have up to 10 years of experience reading the failure patterns that desert heat, UV and freeze-thaw nights produce in CGI vinyl frames, seals and glazing. When a part is still supported we go with genuine CGI replacement sash, glazing, weatherstripping and hardware. When a profile is discontinued, we match it with quality aftermarket components rather than force a mismatched roll-form to save a dollar. Quality parts that actually fit the extrusion matter more here than speed, because a seal that doesn’t seat right is the first thing Mojave dust will find.

Scheduling is straightforward, and we walk you through what we’re seeing before you commit to anything.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Common CGI Windows & Doors Problems We Solve in Boulder City

These are the failures we run into most on CGI units around Boulder City, and what drives each one:

  • Sun-baked vinyl frames that warp and bow. CGI Estate Series double-hungs on south- and west-facing elevations take repeated summers above 105°F, and over time the frames distort. You end up with sash-to-frame gaps and daylight showing at the meeting rail. Once the extrusion has moved, seals can’t compensate for it.
  • Weatherstripping and bulb seals that harden and shrink. Mojave UV dries these out faster than most homeowners expect. On CGI sliders and hung windows the result is wind-blown dust entering at the jambs and a sash that rattles in high-wind events. A seal that’s gone brittle isn’t doing its job, even if it’s still physically there.
  • Fogged or hazy glass from failed sealed units. Factory glazing seals and IGU spacers degrade under UV and thermal cycling. Fixed and picture windows that catch the most direct sun tend to fail first, and once the seal is gone the unit fogs and can’t be cleaned clear.
  • Strike misalignment and swelling on hybrid door assemblies. In the historic core, older wood and steel exterior doors retrofitted with CGI-compatible hardware often shift out of alignment. The slab and frame move differently through freeze-thaw nights than modern hardware expects, so the strike drifts and the bottom rail swells.
  • Roller and balance wear on sliders and hung units. Dust grit that gets past worn seals works into rollers and balance tracks. Sashes get stiff, then start dragging, and eventually they won’t stay where you put them.

CGI Service in Boulder City: What Local Conditions Mean for Your Project

The single most important local factor for CGI work here isn’t the heat. It’s design review. Boulder City’s historic district review can require wood-clad or true divided-light profiles on street-facing windows, which means a straightforward vinyl-only replacement, the kind that works fine in newer Henderson subdivisions, can stall at approval. The practical answer for CGI owners in the historic core is a retrofit that keeps a divided-light look on the street side while upgrading to modern low-E insulated glass behind it. We do this regularly. True divided-light appearance, current performance.

In a 1940s bungalow, the original wood double-hungs have often been swapped over the years for CGI vinyl sliders whose seals have since hardened in the sun, so dust streaks the glass and the sashes rattle in spring wind. The usual path there is a full-frame or insert replacement that respects the review requirement and solves the thermal-cycling and dust problems in the same visit. A qualified local pro pulls the failed unit, checks the rough opening and plaster returns, sets the new frame plumb with fresh flashing and backer rod, then reinstalls the trim. Doing the sequence right is what keeps the next ten summers from reopening the same gaps.

CGI Models & Products We Service in Boulder City

We work on the CGI window and door types that come up most in Boulder City homes: Estate Series vinyl single-hung and double-hung windows, Sentinel Series impact-rated windows and doors, horizontal roller sliders in 2-lite and 3-lite configurations, and vinyl patio and French-style sliding doors. For a homeowner comparing impact protection or energy performance across brands, it helps to see how CGI stacks up against the rest of our CGI lineup and the other impact-rated lines we work with.

Parts selection starts with the failure, not the catalog. If the extrusion profile is still supported, we use genuine CGI replacement sash, glazing, weatherstripping and hardware. If it’s discontinued, we match profile and color with quality aftermarket components that fit the roll-form properly. A mismatched part that saves a few dollars and leaks dust is no savings.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in Boulder City

Every job is priced per job by a written estimate, and the estimate is free. Here’s a general breakdown of what the work typically runs:

Service Typical Estimated Range
Seal, weatherstripping and hardware repair (per window) $120 – $280
Failed sealed unit / IGU replacement $180 – $450
Sash, roller and balance replacement $150 – $350
Insert replacement (per opening) $600 – $1,400
Full-frame replacement (per opening) $900 – $2,400
Patio or French-style sliding door replacement $1,400 – $4,000

What drives the number: opening size, whether the frame is sound enough for an insert or needs a full frame, glass spec, divided-light or impact requirements from design review, and access to the opening. A full-frame job on a plaster-walled bungalow takes more careful work at the returns than an insert on a clean 1970s ranch opening.

Your written estimate is line-item and fixed; the price doesn’t change once work starts. Call (833) 549-7716 for an exact quote on your Boulder City project, free of charge.

Serving Boulder City, NV – Our Local Coverage Area

We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – CGI Windows & Doors in Boulder City

Service Areas Near Boulder City

We work with homeowners on CGI windows and doors in Boulder City and across the surrounding area, including Henderson, Whitney, Spring Valley, Paradise and Las Vegas. If you’re nearby and wondering whether your home falls within our coverage, give us a call and we’ll confirm.

Book Your CGI Service in Boulder City Today

Whether you’re deciding between repair and replacement or planning a full-frame retrofit that clears design review, we’ll give you a clear, written estimate before any work begins. Call (833) 549-7716. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From the frame to the threshold, we handle the full opening.

Written by the team at Spring Valley Windows & Doors.

Need Windows & Doors help in Boulder City? Licensed & insured · free written estimates
Call (833) 549-7716
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Spring Valley Windows & Doors responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch