Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Windows & Doors in Boulder City, NV
We provide independent CGI window and door service across Boulder City, from the 1930s bungalows of the historic core to the ranch homes in the outlying pockets. The one thing that makes our CGI work here different: many street-facing openings sit under historic design review, so we often pair period-correct frame profiles with modern high-performance glazing instead of dropping in a standard vinyl unit. That combination is where a lot of outside contractors miss the mark in Boulder City. Call (833) 549-7716 to talk through your project and set up a free estimate.
Why Boulder City Residents Choose Us for CGI Service
We’re an independent service provider. We’re not affiliated with, authorized by, or endorsed by CGI, and that independence is the point. We quote repair, retrofit or replacement on the merits of the CGI unit in front of us, not on a dealer program that pushes one outcome.
CGI is one of the brands Boulder City homeowners call about most, so we’ve seen where these units hold up and where they don’t in this climate. Our technicians have up to 10 years of experience reading the failure patterns that desert heat, UV and freeze-thaw nights produce in CGI vinyl frames, seals and glazing. When a part is still supported we go with genuine CGI replacement sash, glazing, weatherstripping and hardware. When a profile is discontinued, we match it with quality aftermarket components rather than force a mismatched roll-form to save a dollar. Quality parts that actually fit the extrusion matter more here than speed, because a seal that doesn’t seat right is the first thing Mojave dust will find.
Scheduling is straightforward, and we walk you through what we’re seeing before you commit to anything.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Solve in Boulder City
These are the failures we run into most on CGI units around Boulder City, and what drives each one:
- Sun-baked vinyl frames that warp and bow. CGI Estate Series double-hungs on south- and west-facing elevations take repeated summers above 105°F, and over time the frames distort. You end up with sash-to-frame gaps and daylight showing at the meeting rail. Once the extrusion has moved, seals can’t compensate for it.
- Weatherstripping and bulb seals that harden and shrink. Mojave UV dries these out faster than most homeowners expect. On CGI sliders and hung windows the result is wind-blown dust entering at the jambs and a sash that rattles in high-wind events. A seal that’s gone brittle isn’t doing its job, even if it’s still physically there.
- Fogged or hazy glass from failed sealed units. Factory glazing seals and IGU spacers degrade under UV and thermal cycling. Fixed and picture windows that catch the most direct sun tend to fail first, and once the seal is gone the unit fogs and can’t be cleaned clear.
- Strike misalignment and swelling on hybrid door assemblies. In the historic core, older wood and steel exterior doors retrofitted with CGI-compatible hardware often shift out of alignment. The slab and frame move differently through freeze-thaw nights than modern hardware expects, so the strike drifts and the bottom rail swells.
- Roller and balance wear on sliders and hung units. Dust grit that gets past worn seals works into rollers and balance tracks. Sashes get stiff, then start dragging, and eventually they won’t stay where you put them.
CGI Service in Boulder City: What Local Conditions Mean for Your Project
The single most important local factor for CGI work here isn’t the heat. It’s design review. Boulder City’s historic district review can require wood-clad or true divided-light profiles on street-facing windows, which means a straightforward vinyl-only replacement, the kind that works fine in newer Henderson subdivisions, can stall at approval. The practical answer for CGI owners in the historic core is a retrofit that keeps a divided-light look on the street side while upgrading to modern low-E insulated glass behind it. We do this regularly. True divided-light appearance, current performance.
In a 1940s bungalow, the original wood double-hungs have often been swapped over the years for CGI vinyl sliders whose seals have since hardened in the sun, so dust streaks the glass and the sashes rattle in spring wind. The usual path there is a full-frame or insert replacement that respects the review requirement and solves the thermal-cycling and dust problems in the same visit. A qualified local pro pulls the failed unit, checks the rough opening and plaster returns, sets the new frame plumb with fresh flashing and backer rod, then reinstalls the trim. Doing the sequence right is what keeps the next ten summers from reopening the same gaps.
CGI Models & Products We Service in Boulder City
We work on the CGI window and door types that come up most in Boulder City homes: Estate Series vinyl single-hung and double-hung windows, Sentinel Series impact-rated windows and doors, horizontal roller sliders in 2-lite and 3-lite configurations, and vinyl patio and French-style sliding doors. For a homeowner comparing impact protection or energy performance across brands, it helps to see how CGI stacks up against the rest of our CGI lineup and the other impact-rated lines we work with.
Parts selection starts with the failure, not the catalog. If the extrusion profile is still supported, we use genuine CGI replacement sash, glazing, weatherstripping and hardware. If it’s discontinued, we match profile and color with quality aftermarket components that fit the roll-form properly. A mismatched part that saves a few dollars and leaks dust is no savings.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Boulder City
Every job is priced per job by a written estimate, and the estimate is free. Here’s a general breakdown of what the work typically runs:
| Service | Typical Estimated Range |
|---|---|
| Seal, weatherstripping and hardware repair (per window) | $120 – $280 |
| Failed sealed unit / IGU replacement | $180 – $450 |
| Sash, roller and balance replacement | $150 – $350 |
| Insert replacement (per opening) | $600 – $1,400 |
| Full-frame replacement (per opening) | $900 – $2,400 |
| Patio or French-style sliding door replacement | $1,400 – $4,000 |
What drives the number: opening size, whether the frame is sound enough for an insert or needs a full frame, glass spec, divided-light or impact requirements from design review, and access to the opening. A full-frame job on a plaster-walled bungalow takes more careful work at the returns than an insert on a clean 1970s ranch opening.
Your written estimate is line-item and fixed; the price doesn’t change once work starts. Call (833) 549-7716 for an exact quote on your Boulder City project, free of charge.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Boulder City
Yes, though the product has to be chosen with the review requirement in mind from the start. Street-facing windows in the historic district often need wood-clad or true divided-light profiles, so we plan the spec around that before ordering anything. The interior-facing and rear openings usually have more flexibility. If you’re unsure what your specific block requires, call (833) 549-7716 and we’ll talk through the process with you.
Because the sealed unit has failed, and Boulder City’s sun speeds that up. UV exposure and the swing between 105°F-plus summer days and freezing winter nights stress IGU spacers and factory glazing seals. Fixed and picture windows taking direct sun are usually the first to go. Once the seal is broken, moisture gets between the panes and the haze won’t clean off; the fix is replacing the sealed unit or, if the frame has also gone, the window.
It depends on whether the frame and glass are structurally sound. If only seals, rollers or balances have failed and the extrusion is still straight, repair is the honest call and usually the better value. If the vinyl has warped or bowed, or the IGU has failed, replacement is the right move because you’re already losing dust and water past the frame. We’ll tell you which situation you’re in after inspecting it. Call (833) 549-7716 to schedule a free estimate.
It hardens and shrinks it faster than in milder climates. UV dries out the bulb seals and weatherstripping, then wind-blown dust works into the gaps at the jambs and the sash starts to rattle during high-wind events. A seal that’s brittle has stopped sealing even if it’s still in place. Replacement with quality material that fits the profile correctly is what stops the cycle.
For some homes, yes, and for others it’s optional. Hail is uncommon in Boulder City, so the usual reason to choose Sentinel Series impact-rated units here isn’t storm protection so much as wind resistance and the extra rigidity that comes with the heavier build. If your home faces sustained high-wind exposure, it’s worth pricing. We’ll give you a straight comparison against non-impact options so you can decide on the merits. Call (833) 549-7716 for a free estimate.
Service Areas Near Boulder City
We work with homeowners on CGI windows and doors in Boulder City and across the surrounding area, including Henderson, Whitney, Spring Valley, Paradise and Las Vegas. If you’re nearby and wondering whether your home falls within our coverage, give us a call and we’ll confirm.
Book Your CGI Service in Boulder City Today
Whether you’re deciding between repair and replacement or planning a full-frame retrofit that clears design review, we’ll give you a clear, written estimate before any work begins. Call (833) 549-7716. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. From the frame to the threshold, we handle the full opening.
Written by the team at Spring Valley Windows & Doors.